Wood Fence Installation in Clovis, CA

Our wood fence installation in Clovis, CA provides timeless style and reliable privacy for your yard. We build picket, board on board, shadowbox, and custom wood fences using quality materials and solid construction. From property line fencing to decorative front yard accents, we design wood fences that match your home and landscape.

Legendary Fence Company Clovis provides professional wood fence throughout Clovis, CA, California and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call 559-377-3324 or request your free quote.

Wood fences that fit Clovis homes and yards

A good wood fence in Clovis has to do more than look nice. It has to line up with real property lines, handle valley heat and irrigation, and still give you the privacy you want. Legendary Fence Company Clovis focuses on wood fence installation that is built around how people here actually use their yards, from small Clovis bungalows to larger lots on the edge of town.

When you contact us, we start with a site visit, not a guess over the phone. We walk the yard with you, check for existing property markers, note slopes, sprinklers, septic lids, pool equipment, and any trees or roots that may affect the fence line. We also ask how you use the space: Do kids or pets lean and climb? Do you need to block a neighbor’s second story window? Do you care more about long life or lowest upfront cost? Those answers guide the design and the lumber choices.

Because Clovis has a mix of older neighborhoods and new builds, we are used to tying new wood fences into old, leaning ones, working around block walls, or replacing builder-grade fences that failed early. We explain what can be reused, what should be removed, and what it will realistically cost to get the fence you are expecting, before we ever set a post.

Your wood fence material and design options

Legendary Fence Company Clovis works with a few specific wood types that perform well in our climate and soils.

For most privacy fences, we recommend cedar pickets on pressure treated posts and rails. Cedar resists rot and insects better than basic pine, holds stain evenly, and does not warp as badly in the Clovis summer heat. For customers who want to minimize maintenance cost, we often suggest rough sawn cedar with an oil-based stain and sealer soon after installation, then light re-coats every few years.

We also install redwood on request, usually in higher-end neighborhoods or for visible street-facing runs. Redwood has a richer color and very good decay resistance, but costs more per foot. For budget fences, especially along side yards or between rental properties, we may use treated pine framework with cedar or pine pickets. We always explain tradeoffs in lifespan, appearance, and upfront cost.

Design-wise, you can choose from standard dog-ear or flat-top privacy fences, board-on-board for better privacy with small gaps, good-neighbor (alternating boards on each side) styles common in many Clovis subdivisions, and shorter picket fences for front yards where you want visibility. We build to typical heights of 4, 5, or 6 feet within Clovis and Fresno County zoning rules, and when you are near a corner or driveway we point out visibility requirements so you do not end up with a fence that violates sightline rules.

We also handle gates in the same trip. That includes heavy-duty double drive gates for RV parking pads, simple side yard walk gates, and pool-adjacent gates that must close and latch reliably. We use heavier posts, stronger hinge hardware, and often a steel frame inside taller wood gates to keep them from sagging in the heat.

How wood fence installation actually works on your property

A lot of problems with wood fences in Clovis start underground, not in the visible pickets. Our installation process is set up to avoid those issues from day one.

After we confirm the layout with you, we call in utility locates when needed and mark out the fence line with stakes and string. If the exact property line is unclear, we explain your options, which may include building slightly inside your known boundary or consulting a surveyor. We do not guess and hope; we want you out of neighbor disputes later.

Next, we remove any existing fence and haul away debris, including old concrete footings. In older Clovis neighborhoods we often find small diameter posts set in shallow, crumbling concrete that let the old fence lean. We replace those with larger posts set to proper depth, often 2 feet or more into the ground depending on fence height, and in some wind-exposed areas we go deeper. We typically use concrete around each post, bell the bottom of the hole for better hold, and crown the top of the concrete so water sheds away from the wood.

Once posts are set and aligned, we install horizontal rails, taking into account slopes in your yard. On gentle slopes we can step sections for a clean look. On more noticeable grades, we may recommend racked panels, where the fence follows the ground more closely so you do not end up with large gaps under sections. This is especially important when you are trying to keep small dogs inside.

Pickets go on after the framework is solid. We check spacing, vertical alignment, and top lines as we work, then return to look down the length of the fence from each side so any waves or gaps are fixed before we leave. If you choose board-on-board or good-neighbor designs, we alternate boards carefully so both sides look finished, which is often required by neighborhood standards. Finally, we hang gates, adjust hinges and latches, and test that they open and close smoothly without dragging.

If you are planning to stain or paint, we review timing with you. Fresh wood needs a short period to dry and acclimate, especially in the heat and low humidity common in Clovis summers, before applying most finishes. We can handle staining as part of the project or leave the fence ready for a painter you choose.

What affects wood fence cost in Clovis

Legendary Fence Company Clovis prices wood fence installation based on details that actually change our time and materials, not vague square foot estimates alone. During the on-site visit we measure each run, note access limits, and look for issues that might increase labor.

The biggest cost drivers are total linear footage, height, and materials. A 6 foot cedar privacy fence with board-on-board design and a couple of custom gates will cost more per foot than a 4 foot basic dog-ear fence with a single small gate. Redwood, heavier posts, decorative caps, and integrated lattice all add to material cost, and we show you the difference in writing so you can decide where upgrades matter most.

Site conditions also matter. Removing heavy old concrete, navigating narrow side yards where everything must be carried by hand, or working around tree roots or block walls can increase labor. Sloped yards take extra effort to cut and fit panels so they look right and still control gaps at the bottom. We explain all of this upfront so the final invoice matches the quote.

Local factors in Clovis, like soil type and irrigation habits, matter too. Clay soils that crack in dry months and swell in wet months can move shallow posts, so we often recommend deeper holes and more concrete in those areas. Many customers water heavily to keep lawns green in summer, which means the bottom of the fence is often wet. For those conditions we may suggest treated ground-contact boards or leaving a small clearance under the pickets to keep them out of standing water.

We are also clear about long-term maintenance cost. If you know you will not keep up with staining, it might be worth selecting a design and material that will still look acceptable as it weathers to gray, rather than paying for premium appearance that depends on frequent upkeep.

Local guidance, permits, and long-term care

Wood fences in Clovis are subject to local rules about height, placement, and what you can build in front yards or near street corners. Legendary Fence Company Clovis is familiar with Clovis and Fresno County guidelines, and we talk you through what is allowed in your situation. In many cases standard backyard privacy fences do not require a separate permit, but when they do, such as unusual heights or certain corner lots, we help you understand the process and can coordinate when needed.

If you have an HOA, we review your association’s fence rules before we start. Many Clovis communities specify fence height, style, and which side of the fence faces the street or neighbor. We can match existing community styles so your new fence passes review and blends in with nearby properties.

After installation, the lifespan of your wood fence depends largely on how you treat it. We provide simple, specific care instructions based on the wood and finish you choose. For most fences, that includes re-staining or sealing every 2 to 4 years, keeping sprinklers from spraying directly on the boards when possible, and trimming vegetation away so plants do not trap moisture against the wood. In hot Clovis summers, small cracks in boards are normal, but leaning posts, large soft spots, or severe warping are not. We explain what is normal aging and what should trigger a repair call.

If your existing fence is mostly solid but has a few bad sections, we can often repair instead of replace everything. That may involve resetting or replacing a few posts, swapping out rotten bottom boards, or rebuilding one side yard gate. During a quote, we are honest about whether repair is worth it or if your money is better put toward a full replacement.

From first visit through final walk-through, our goal is a wood fence that looks right on your property, handles Clovis weather and watering habits, and does not surprise you with hidden issues. When you are ready to talk specifics, Legendary Fence Company Clovis is ready to measure, design, and build a wood fence that fits your actual yard and budget.