Home › Commercial Chain Link Fences
Our commercial chain link fences in Clovis, CA secure industrial and commercial sites with cost effective durability. We install standard and heavy gauge systems with options for barbed wire, razor wire, and privacy slats. Ideal for storage yards, equipment lots, and facility perimeters, our fences are built to withstand daily use and harsh conditions.
Legendary Fence Company Clovis provides professional commercial chain link fence throughout Clovis, CA, California and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call 559-377-3324 or request your free quote.
Practical Commercial Chain Link Solutions in Clovis
Commercial chain link fence projects in Clovis are about function first: security, visibility, and durability in our hot, dry summers and occasional winter rains. Legendary Fence Company Clovis focuses on building fences that match how your property is actually used, not just what looks good on paper.
For warehouses and equipment yards along Herndon or Shaw, we typically recommend 6 to 8 foot commercial chain link fence with heavier gauge wire and upgraded fittings. For retail centers or multifamily properties closer to Old Town Clovis, we often balance security with appearance by using vinyl-coated chain link in black or dark green, which blends better with landscaping while still providing visibility for security cameras.
Commercial chain link is popular locally because it handles Central Valley sun, irrigation overspray, and dust better than many other materials at the same price point. It is also easier to modify later if you plan to expand, shift driveways, or add gates as your operation grows. Before we quote anything, we look at access points, traffic patterns, and where people actually enter and exit your property, then design the fence layout around that reality.
How We Design Your Commercial Chain Link Fence
A successful commercial chain link fence starts with a clear layout. Our process at Legendary Fence Company Clovis begins with an on-site walk of your property. We mark out corners, measure clearances for trucks and equipment, identify utility lines, and flag any grade changes that could affect fence height or gate swing.
Next, we help you select the right materials:
• Height: Most commercial sites in Clovis use 6, 7, or 8 foot fences. Storage yards, fleet parking, and high-theft risk sites often choose 8 feet with three strands of barbed wire. Apartment complexes and sports courts typically use 6 feet for code compliance and visual comfort.
• Framework: For commercial applications, we use schedule 40 or HF20 posts and rails, not light residential pipe. Heavier pipe resists vehicle impact, wind, and long-term sagging. Corner and gate posts are always upsized because they carry more stress.
• Fabric: Options usually include 9 or 11 gauge galvanized chain link, or vinyl-coated fabric over galvanized. Heavier gauge is harder to cut and holds up better to impact. Vinyl-coated fabric reduces glare and corrosion, which matters in irrigated landscapes or near industrial moisture.
• Add-ons: We plan for tension wire, privacy slats, wind screens, barbed wire or razor ribbon, knuckled or twisted top selvage, and specialized gates. For sports facilities near Clovis schools, we often design backstops and tall foul ball fencing that go beyond basic perimeter needs.
All of these choices affect cost and performance, so we walk through each one with you and match the specification to what you are actually trying to protect.
Installation Steps You Can Expect Onsite
Legendary Fence Company Clovis follows a consistent install process so you know what will happen on your property and how long it will take.
1. Layout and marking: We stake the fence line, corners, and gate locations, then verify property lines with you. If you have a recent survey, we use that. If not, we work off visible markers and your guidance and recommend a survey when boundaries are unclear or disputed.
2. Underground check: In Clovis and the greater Fresno County area, we coordinate utility marking so gas, electric, communications, and irrigation lines are identified before digging. This avoids costly damage to service lines.
3. Post holes and concrete setting: We drill or dig post holes to the proper depth, typically 24 to 36 inches depending on fence height and soil conditions. In some older Clovis industrial sites, we sometimes hit hardpan or debris and adjust depth and concrete volume to maintain stability. We then set posts in concrete, align them, brace if needed, and let the concrete cure properly.
4. Framework assembly: Once posts are solid, we install top rail, sometimes bottom rail or tension wire, and any mid rails required. We double check that gates will clear slopes and existing pavement so you do not end up with dragging or binding.
5. Fabric installation: We attach the chain link fabric to one terminal post, stretch it tightly along the run using professional stretchers, and then secure it to line posts and rails. We use the right tension bars, bands, and ties to keep the fence tight and uniform.
6. Gates and security upgrades: Finally, we hang swing or slide gates, adjust hinges and latches, and install barbed wire, privacy slats, or wind screens if specified. Before we leave, we walk the fence line with you, check for weak points, and confirm that all gates close and lock correctly.
Local Conditions, Timing, and Code Considerations
Building a commercial chain link fence in Clovis is not just about hardware, it is also about timing, weather, and compliance.
Weather and timing: Our hot summers mean we often schedule concrete work early in the morning so the mix does not flash set in extreme heat. Winter rains can slow digging in heavy clay areas, especially on undeveloped parcels east of Clovis. In general, late fall and early spring are the easiest times to schedule if you want minimal weather-related delays, but we build year-round and adjust methods as needed.
Soils and drainage: Central Valley soils range from sandier areas near riverbeds to dense clay. On soft or sandy ground, we may enlarge footings or use deeper posts for stability. Where irrigation runoff or parking lot drainage crosses the fence line, we plan for small grade changes, concrete mow strips, or raised bottoms so water can pass without undermining the fence.
Codes and zoning: For many commercial chain link fence projects in Clovis, height and location rules come into play, especially along street frontages or near intersections where sight distance matters. We help you understand when you may need permits, what heights are typically allowed in front, side, and rear yard commercial setbacks, and whether barbed wire or razor ribbon is permitted in your zoning. For properties near schools, residential zones, or public streets, there can be specific restrictions, and we design within those limits so you do not face enforcement problems later.
What Drives Cost and How to Control It
Several concrete factors drive the cost of a commercial chain link fence, and understanding them helps you choose where to invest and where to save.
Material specification: Taller fences, heavier gauge fabric, upgraded framework, and extras like privacy slats or barbed wire all add cost. A 6 foot fence with 11 gauge galvanized fabric and standard framework is typically the most economical starting point. Moving to 8 feet, 9 gauge fabric, and enhanced security toppings will increase the price but may be justified at high-risk sites or where insurance requires it.
Access and site conditions: Clear, level sites with easy truck access around Clovis Business Park are faster and less expensive to fence than tight, sloped, or obstructed lots in older industrial areas. Removing old fencing, concrete, or heavy brush increases labor and disposal costs. We are upfront about these factors during the site visit so surprises are minimized.
Gates and hardware: Large slide gates for truck yards or automated gates tied to access control systems are significant cost drivers. Sometimes cost can be reduced by adjusting gate width, choosing manual instead of automated operation, or using a pair of swing gates instead of a long slide gate, depending on your traffic and space.
Phased installation: If budget is tight, we can plan the project in phases, for example, securing the most vulnerable side or equipment area first, then completing the rest later. Legendary Fence Company Clovis is direct about where cutting cost will impact durability or security and where it will not, so you can prioritize with clear information.
Common Problems We Solve and How to Get Started
Most commercial chain link fence calls we receive in Clovis fall into a few real-world categories: fences that were underbuilt, poorly installed, or never designed for current use.
Underbuilt fences: Light residential-grade chain link installed at commercial sites tends to lean, stretch, or collapse when hit by forklifts, delivery trucks, or repeated employee traffic. We correct this by upgrading posts and rails, installing proper bracing, and in many cases, replacing fabric with a heavier gauge that does not deform easily.
Poor gates: Many businesses struggle with gates that drop, drag, or will not latch after a few years. This usually traces back to undersized posts, incorrect hinge placement, or lack of proper footings. When we replace or repair gates, we oversize posts and use hardware designed for daily commercial use, then set everything in adequate concrete so the problem does not repeat.
Changing site needs: Yards that were once open storage often evolve into controlled-access facilities. We regularly convert simple perimeter fences into more secure systems by adding internal dividers, vehicle gates, pedestrian access gates, and tie-ins to card readers or keypad systems. We design these upgrades so emergency access is preserved and traffic flow still works.
If you are considering a new commercial chain link fence in Clovis or need an existing one corrected, Legendary Fence Company Clovis will start with a site visit, clear measurements, and a written scope of work. You get specific lineal footage, materials, and hardware called out so you know what you are paying for and how it will perform over time.
