Home › Commercial Gates and Access Control
We install commercial gates and access control systems in Clovis, CA that keep traffic flowing while protecting your property. Our solutions include sliding and swing gates, heavy duty operators, keypads, card readers, and safety sensors. We integrate gates with your perimeter fence to create reliable, secure entry points.
Legendary Fence Company Clovis provides professional commercial gate installation throughout Clovis, CA, California and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call 559-377-3324 or request your free quote.
Commercial Gate Installation for Clovis Businesses
Commercial gate installation is only worth the money if it solves real problems on your property. At Legendary Fence Company Clovis, we focus on how people and vehicles actually move through your site in Clovis, not on selling the biggest or most expensive gate.
We start every commercial gate project with a walk through of your lot, driveway, loading area, or yard. We look at truck turning space, fire lane access, slopes in the concrete or asphalt, and where utilities are buried. In Clovis and nearby Fresno, a lot of warehouse and industrial sites have uneven approaches or tight entries from older streets, so we plan the gate type and hardware around those constraints.
From there, we help you choose between common commercial gate styles. Slide gates are popular along property lines where there is no room to swing a gate inward, which is common along busy Clovis roads like Shaw Avenue. Swing gates are a good fit for wide, open lots with level approaches. Cantilever slide gates work well for heavy use entrances because they roll on hardware mounted to the fence rather than a track in the driveway, so gravel and dust from the Central Valley climate do not jam them as easily.
We also address wind and dust conditions that are typical in the area. Solid panel or privacy-style commercial gates can act like sails in strong valley winds. When we design those, we size the posts, hinge hardware, and concrete footings accordingly or break the span into multiple leaves to reduce strain. That kind of upfront planning is what keeps your gates from sagging or dragging after a couple of hot Clovis summers.
Gate Types, Materials, and Layout Options
Most commercial gate installations in Clovis use steel, aluminum, or a combination of metal frames with wood or composite infill. For industrial yards, we usually recommend galvanized steel chain link or welded steel frames with expanded metal because they stand up to forklifts, truck mirrors, and daily abuse. For office parks and multi tenant retail, powder coated ornamental steel or aluminum looks cleaner and ties in better with existing architecture.
For slide gates, the biggest layout decision is whether to use a ground track or a cantilever design. Ground track systems need a steel track embedded or anchored into the driveway. They cost less up front but need more maintenance if you have a lot of dirt, gravel, or leaf debris. Cantilever systems keep the moving parts off the ground, which is helpful in agricultural areas around Clovis where mud and irrigation runoff are common. We explain the tradeoffs so you can choose the right approach for your traffic and budget.
Swing gates are simpler mechanically but they need clear space to open. We measure exactly how far the gate can swing without hitting parked vehicles, bollards, or buildings, and we account for snowplow berms or landscape curbs. On sloped driveways, we may recommend an uphill hinge kit, a smaller gate leaf, or switching to a slide gate to avoid the bottom edge scraping on concrete.
Hardware choices matter more than most people think. Commercial hinges, adjustable J-bolts, steel posts with sufficient wall thickness, and properly sized anchor bolts all affect how long your gate stays square. We use gate frames and posts that match the weight and width of your gate, not whatever is cheapest at the supply house. Before we finish design, we provide a clear drawing that shows gate swing or slide direction, operator placement, safety loops, and pedestrian access paths so you can confirm it works with your business operations.
Access Control Systems Built for Real-World Use
A gate that opens and closes is only part of the picture. The access control system is what actually manages who gets in and when. Legendary Fence Company Clovis installs keypad entry, card and fob readers, telephone entry, and automatic vehicle detection systems suited to local business needs.
For small businesses like auto shops or storage yards, a simple keypad with programmable codes may be enough. You can issue individual codes to employees and vendors, then remove them if someone leaves. For larger sites or multi tenant facilities, card or fob readers tied to a simple access database give you better tracking and control.
In Clovis, many commercial properties share driveways or have limited stacking space at the entrance. We design access systems so vehicles are not blocking traffic while drivers fumble with controls. That might mean moving the keypad back from the street, adding a separate exit loop for faster flow, or using long range readers so employees can enter without rolling down windows in extreme heat.
We also pay close attention to visitor access. Telephone entry systems allow guests, delivery drivers, and contractors to call a specific tenant or office from the gate. Modern systems can call cell phones, not just landlines, which is useful for property managers who are off site. We can integrate gate operators with existing security cameras, intercoms, or alarm systems so you have both visual verification and logged entry events.
Power supply and backup are important in the Central Valley where summer loads can strain the grid. We size transformers correctly, use dedicated circuits where needed, and can install battery backup so your gate continues to operate in a short outage. For critical facilities, we discuss manual release procedures with your staff and make sure the gate can be operated safely if power is down.
Safety, Compliance, and Maintenance for Clovis Properties
Safety is not optional with powered commercial gates. We design and install in line with UL 325 and ASTM F2200 guidelines, which address entrapment risks, pinch points, and emergency access. This is especially important if your Clovis property has residential tenants, public traffic, or children nearby.
Every automated gate we install includes properly placed photo eyes and vehicle detection loops to reduce the chance of the gate closing on a person or car. On slide gates, we look for areas where someone could get pinned between the moving gate and a fixed object, and we adjust fencing, posts, or add protective covers to prevent that. We also coordinate with your fire department access requirements, including Knox key switches or strobe sensors, so emergency vehicles can get in without delay.
Local conditions matter for long term reliability. The combination of Central Valley heat, agricultural dust, and occasional fog means gate operators and access control equipment need good weather protection and ventilation. We typically mount operators on concrete pads, use weather rated enclosures, and seal conduit entries so spiders, dust, and moisture do not corrode connections.
To keep your investment working, we provide clear maintenance guidelines. That usually includes periodic lubrication of hinges and rollers, checking chain tension on slide gates, cleaning photo eyes, and gently washing dust off keypads and card readers. Many Clovis businesses schedule an annual or semiannual service visit with us so we can test safety features, update codes or credentials if needed, and fix small problems before they turn into shutdowns during your busiest times.
If something does fail, we troubleshoot from the basics up, starting with power, fuses, and simple sensor alignment before recommending part replacement. When older operators or control boards are no longer supported, we can retrofit modern units onto existing gates to extend the life of your physical gate structure without rebuilding everything.
What Drives Cost and How Legendary Fence Company Clovis Works
Commercial gate installation costs in Clovis vary based on a few main factors: gate size and weight, material, whether the gate is manual or automated, the complexity of the access control system, and what we have to work with at your site.
A manual chain link slide gate on an existing level driveway will be on the lower end. A tall double swing ornamental steel gate with a pair of operators, card readers, telephone entry, and camera integration will be higher. Long wire runs, trenching through asphalt or concrete, boring under driveways, and upgrading power service also add to cost. We explain these items in plain language before you commit.
Many commercial properties in Clovis have existing fences that are leaning, mismatched, or anchored in shallow footings. If your fence cannot support a new gate safely, we will show you where it needs reinforcement or replacement. Sometimes we can re use part of the existing structure and only rebuild the gate posts and adjacent panels, which saves money while still giving you a solid gate system.
Our process is straightforward. First, we meet on site and discuss how you use the property: busy times, typical vehicle sizes, who needs 24 hour access, and any security incidents you have had. Second, we map out a practical gate and access control layout and provide a written proposal with materials, equipment models, and a rough timeline. Third, once approved, we schedule work to minimize disruption, which can mean partial day closures, weekend work, or temporary access routes.
During installation, our crew handles concrete work, steel fabrication, operator mounting, wiring, and programming. At the end, we walk your team through operation, safety features, and how to add or remove access codes or cards. With Legendary Fence Company Clovis, you are not left with equipment you do not understand. You get a commercial gate system that matches how your business actually runs, along with a local team you can call for adjustments or future expansions.
